Gilbert Smart Home Automation
Smart Home Automation Installation in Gilbert, AZ
Smart home automation installation in Gilbert, AZ — security integration, voice control, Wi-Fi mesh networking. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Gilbert and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Smart Home Automation Installation
Best Smart Home Automation Company for Gilbert Homes
Gilbert's housing stock spans 1990s tract homes through brand-new construction. That mix matters more than any brand logo on the box. A thermostat or lock that installs cleanly in a 2020 build can hit a wall, literally, in an older stucco home with different wiring access.
Gilbert Smart Home Automation handles both. We run an on-site wiring assessment before quoting anything, then match hardware to your house instead of locking you into one ecosystem. That's the difference between a real local installer and a big-box kiosk reading from a script.
What we do
Smart Home Automation Installation services
Smart Home Automation Installation across Gilbert and the surrounding area.
Smart Home System Design & Consultation
Smart home system design consultation in Gilbert, AZ. Wiring assessment, brand-matching, written proposal. Free estimates.
Learn more →
Home Automation System Installation
Whole-home automation system installation in Gilbert, AZ. Hub setup, device pairing, retrofit wiring. Free estimates available.
Learn more →
Security Integration (Cameras, Locks, Sensors)
Smart security integration in Gilbert, AZ — cameras, locks, and sensors tied into one app. Free estimates, heat-rated outdoor hardware.
Learn more →
Voice Control & Whole-Home Automation Setup
Voice control and whole-home automation setup in Gilbert, AZ — one app, one voice assistant, every device. Free estimates.
Learn more →
Networking & Wi-Fi Mesh Installation
Wi-Fi mesh installation in Gilbert, AZ for reliable whole-home coverage through stucco and block walls. Free estimates.
Learn more →
Smart Lighting & Climate Control
Smart lighting and climate control installation in Gilbert, AZ — zoned thermostats and switches built for summer cooling costs. Free estimates.
Learn more →
Whole-Home Audio & Video Integration
Whole-home audio and video integration in Gilbert, AZ — multi-room sound and video tied into your smart system. Free estimates.
Learn more →
Smart Lock & Access Control Installation
Smart lock and access control installation in Gilbert, AZ — weather-rated hardware and app-based entry. Free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Gilbert Smart Home Automation
Retrofit experience in stucco and block-wall homes
Gilbert's housing stock runs from 1990s tract homes to new builds. We pull low-voltage wiring through stucco and block without tearing out drywall, and we tell you upfront when a wall needs a different approach.
Heat-rated hardware for exterior devices
Desert summers are hard on anything mounted outside. We spec locks, cameras, and access points rated for Phoenix-metro heat so they hold up past year one.
Brand-agnostic system design
Most homes end up with a mix of brands bought over a few years. We match gear to your house and resolve hub conflicts instead of pushing one ecosystem.
Written estimates before any work starts
You get a scope and a number before we touch a wall or a panel. No surprise add-ons once the job is underway.
Have a project in mind?
Get a Free EstimateHow it works
How our Smart Home Automation Installation process works
Step 1Site visit and wiring assessment
We walk the house, check panel capacity, and note wall types before quoting anything.
Step 2System design and device compatibility plan
We map which hubs, brands, and devices will actually work together in your home.
Step 3Mounting and wiring
Devices get mounted and wired, running low-voltage lines through stucco or block as needed.
Step 4Hub and network configuration
We set up the control hub, app accounts, and network settings for every device.
Step 5Device pairing and testing
Each device gets paired, tested, and checked for signal strength and reliability.
Step 6Walkthrough and follow-up
We walk you through the app and controls, then follow up after a few days of use.
Ready to start?
Get a Free EstimateCost
Smart Home Automation Installation Cost Ranges in Gilbert, AZ
Pricing depends on three things: how many devices, how much wiring the job needs, and whether your walls are stucco, block, or drywall. Here's a rough breakdown. Get a firm number with a free estimate before committing to anything.
| Project type | Typical range | What’s included |
|---|---|---|
| Single-device add-ons | $200–$800, | one smart lock, thermostat, or camera with app setup. |
| Room-level upgrades | $800–$2,500, | lighting, climate, and a few security devices in one area. |
| Whole-home automation | $4,000–$12,000, | full hub setup, multi-room devices, voice control tie-in. |
| Security + wiring retrofit | $5,000–$15,000, | cameras, locks, sensors, plus new low-voltage runs through older walls. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Hardware and Methods We Install in Gilbert Homes
We don't sell whatever's on the shelf. Here's what actually goes into a Gilbert install.
Smart hub/controller
The brain of the system. We pick one that bridges multiple brands instead of locking you into a single app.
Wi-Fi mesh nodes
Stucco and block walls eat signal. Mesh nodes placed correctly keep coverage even in two-story homes.
Zoned smart thermostats
Arizona summers push AC hard. Zoning cuts down on cooling waste room by room.
Smart lighting switches and dimmers
In-wall switches that pair with scenes and schedules, not just standalone bulbs.
Weather-rated exterior locks and cameras
Desert heat kills cheap plastic housings fast, so exterior hardware needs heat-rated components built for the climate.
Low-voltage wiring methods
Fish-tape and conduit runs for retrofit jobs where drywall stays intact.
Questions on materials?
Get a Free EstimateTimeline
How long does a Smart Home Automation Installation take?
Most projects move through four stages from first call to final walkthrough.
- 01
Consult
same day - 02
Design and proposal
1–3 days - 03
Install
1–3 days - 04
Configuration and testing
half day - 05
Walkthrough
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, Codes, and Compliance for Smart Home Installation
Here's what typically needs a permit and what doesn't. Always confirm with the Town of Gilbert before scheduling.
| Typically needs a permit | Often no permit |
|---|---|
| Electrical panel upgrades | Low-voltage device swaps (locks |
| New dedicated circuits for equipment | cameras |
| Structural changes to walls for wiring access | sensors) |
| — | Wi-Fi mesh installation |
| — | App-based automation configuration |
| — | Smart thermostat or switch replacement on existing wiring |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Smart Home Automation Pro
| DIY | Hire a pro |
|---|---|
| Single smart plugs or bulbs | Retrofit wiring through stucco or block walls |
| One-off smart speakers | Multi-brand hub setups with conflicting apps |
| Basic app-connected devices with no wiring | Whole-home scope with security tie-in |
| — | Panel capacity questions on older homes |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call a Smart Home Automation Pro
Call or request a free estimate and we'll walk the house with you.
- Your HOA has rules on exterior cameras or doorbells and you're not sure what's allowed
- You've bought devices from three different brands and none of them talk to each other
- You want whole-home wiring, not just a few plug-in gadgets
- You're trying to tie pool or irrigation equipment into the same app
- Your panel is older and you're not sure it can handle more smart devices
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Gilbert and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Outside these locations?
Before & after
See the work up close
Before 
After
Customer feedback
What local customers say
Jennifer D.
1 month ago
5 out of 5 starsCalled Gilbert Smarthomeautomation after a neighbor tip in Gilbert. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our security integration (cameras, locks, sensors).
Gilbert, AZ
Joshua C.
2 weeks ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the smart home system design & consultation turned out better than I pictured.
Chandler, AZ
Justin K.
3 weeks ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for voice control & whole-home automation setup. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Mesa, AZ
Common questions
Smart Home Automation Installation FAQs
How much does a smart home installation cost?
Most whole-home projects land between $4,000 and $15,000 depending on device count, wiring access, and brand tier. Single-room upgrades can run $500 to $2,500. The real swing factor is how much new wiring the job needs.
How much does Smart Home Automation Installation cost in Gilbert?
Gilbert pricing follows the same drivers as anywhere else: device count, retrofit vs. new-construction wiring, and whether you're adding a hub from scratch. Stucco and block-wall homes sometimes add labor time for wiring runs. A free estimate gets you a real number for your house.
Which company is the best for smart home automation?
Look past the star rating. The better question is whether the installer does an on-site wiring assessment, works across brands instead of pushing one, and gives you a written scope before starting. That's the actual difference between a real installer and a kiosk.
Which company is best for home automation?
Same answer as above. Prioritize installers who explain retrofit wiring limits for your specific house, not just ones with the most reviews.
How can I turn my house into a smart house?
Start with a design consultation. A good installer inventories your devices, plans the wiring and hub setup, then installs in stages: lighting and climate first, security and locks next, then whole-home voice control.
How long does Smart Home Automation Installation take?
A single-room add-on usually wraps same day. Whole-home automation with wiring, security, and multi-room audio typically runs 2 to 5 days depending on scope.
Do I need a permit for Smart Home Automation Installation?
Low-voltage device swaps, Wi-Fi mesh, and app-based automation usually don't need one. Panel upgrades and new electrical circuits usually do. Check with the Town of Gilbert building department for your specific project.
Is DIY Smart Home Automation Installation a good idea?
For a single smart plug or bulb, sure. Once you're running wiring through a stucco wall or pairing three different brands into one hub, that's where DIY kits usually stall out and a pro saves you the redo.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Gilbert.